What Causes Fish Eyes in Paint

Fish eyes in paint are caused by the presence of air bubbles or contaminants. These contaminants can be anything from dust, dirt, solvents, and other particles that have been introduced into the paint during mixing or application. Air bubbles can form due to under-mixing when not enough time is spent ensuring a thorough mix as well as poor stirring techniques.

Contaminants such as oils and waxes can also cause fish eyes because they create a barrier between the paint and the surface. To avoid fish eyes, it is important to ensure proper preparation of surfaces prior to painting, use good quality products with no additives that could cause contamination, mix thoroughly for an adequate amount of time before applying, and stir properly while painting.

Fish Eyes in paint are a common problem that can occur when painting. It occurs when air bubbles get trapped within the coating and create little round indentations, resembling fish eyes. These are usually caused by contamination such as dirt, oil, or other contaminants on the surface being painted.

Additionally, it can be caused by using an incompatible thinner with the paint or not allowing enough time for each coat of paint to dry before applying another one. To avoid this issue, make sure that you always properly prepare your surfaces before beginning to paint and use appropriate thinners with your chosen paints.

What Causes Fish Eyes in Paint

Credit: chemtrend.com

What is the Most Effective Way to Eliminate Fish Eyes?

The most effective way to eliminate fish eyes from a paint job is to use a high-quality primer and apply it evenly so that the surface is completely sealed. You should also make sure the paint you are using has been mixed properly and contains no lumps or bubbles. Additionally, before applying the finish coat be sure to sand down any raised areas of the substrate in order to achieve an even surface.

Lastly, if you still have fish eye problems after all of these precautions, try adding a few drops of flow aid into your topcoat which will help reduce air bubbles that cause fish eyes.

Can Humidity Cause Fish Eyes in Paint?

Yes, humidity can cause fish eyes in paint. This occurs when moisture or oils on the surface of the substrate are not properly removed before painting. As a result, water droplets form on the surface and attract dirt from the air.

The dirt particles then become embedded into the paint film creating an uneven finish known as “fish eyes”. To prevent this problem, always make sure to clean and dry surfaces thoroughly with a lint-free cloth prior to painting and use proper ventilation during application to eliminate any airborne contaminants that could be present in your environment.

What Causes Fish Eye Primer?

Fish eye primer is caused by a variety of factors, such as silicone contamination, improper surface preparation, and priming before the previous coat has completely dried. Silicone contamination can be due to oils in your hands or tools used on the substrate prior to painting, or from contaminants that may have been left behind when cleaning. Inadequate surface preparation can lead to an uneven application of paint, resulting in fish eyes.

Lastly, if you apply primer before the old coat has fully cured it will cause air pockets which then become visible when applying new layers of paint. It’s important to ensure that any surfaces being primed are clean and dry and that all coats have had ample time to cure before applying more coats overtop.

Explained: What Causes Fish Eyes In Paint Finish?

How to Prevent Fish Eyes in Paint

A common issue when painting is the occurrence of ‘fish eyes’ in the paint, which are circular depressions that don’t allow the coating to adhere properly. To prevent this from happening, it’s important to thoroughly clean and prepare surfaces before applying any coatings. This includes removing dirt, grease, or other contaminants with a degreaser or detergent cleaner.

It’s also essential to use a quality primer and make sure not to apply the topcoat too thickly as this can lead to fish eyes appearing in the finished product.

Can You Paint Over Fish Eyes

Yes, you can paint over fish eyes! Painting your lure is one of the best ways to customize it and make it more attractive for different types of fish. It also helps protect against weathering damage and gives the lure a longer lifespan.

When painting over existing fish eyes, use an even layer of paint that covers both sides of the eye completely. Make sure to allow time for the paint to dry before using your lure in the water!

How to Fix Fish Eyes in Single-Stage Paint

Fish eyes are a common problem in single-stage paint jobs, and can be caused by a number of factors such as improper surface preparation or contamination. The best way to fix them is to first identify the root cause, then take steps to address it. This could involve cleaning the surface with wax and grease remover, sanding any existing fish eyes out, or switching over to a two-stage painting process that will provide better adhesion between coats.

Once you have addressed the underlying issue, you can apply an additional coat of paint and your car should look as good as new!

Fisheye Car Paint

Fisheye car paint is a type of automotive paint that creates an eye-catching “fisheye” effect. It’s often made from acrylic polymers and pigments, and usually contains additives such as small metal flakes or glitter to give it extra sparkle. When applied correctly, Fisheye Car Paint can create stunning visual effects with vibrant colors that shine in the sunlight.

The unique look created by this type of paint makes cars stand out in any setting, making it popular among custom vehicle enthusiasts who want their vehicles to be noticed.


This blog post discussed the potential causes of fish eyes in paint. It is important to understand that fish eyes are caused by a variety of factors, including improper cleaning and preparation, contamination from oil or grease, incorrect mixing ratios, and poor application techniques. Taking the time to properly clean and prepare surfaces for painting can help avoid problems with fish eyes.

Similar Posts