How to Use an Anchor Trolley on a Kayak

An anchor trolley is a system of pulleys and lines that lets you position your kayak’s anchor anywhere along the length of your kayak. It’s a great way to keep your kayak stationary in windy conditions or when fishing from a kayak. Here’s how to use an anchor trolley on a kayak:

1. Attach one end of the anchor trolley line to the front deck ring of your kayak using a carabiner.

2. Run the line through both side rail loops and around the back deck ring.

3. Attach the other end of the line to the back deck ring using a carabiner.

4. Adjust the position of the middle pulley so that it’s about midway between the front and back deck rings.

5. Clip your anchor into the snap hook at the end of the trolley line.

  • Find the centerline of your kayak
  • This is the line running from the bow to the stern and is usually marked with a decal or sticker
  • Locate the attachment points for your anchor trolley
  • These are typically located near the cockpit of the kayak and will be reinforced with grommets or D-rings
  • Run one end of your anchor trolley line through both attachment points, then tie a knot to secure it in place
  • Leave enough slack in the line so that you can adjust its position later on
  • Attach your anchor (or other weight) to the free end of the trolley line using a carabiner or similar clip
  • Make sure that the anchor is securely attached! 5
  • Position the anchor trolley line so that it runs along the centerline of your kayak, from front to back
  • This will help keep your kayak stable when you’re anchored in place
  • When you’re ready to set up camp or fish from a specific spot, simply lower your anchor over the side of the kayak and let out enough line to reach the bottom
  • The trolley system will hold your kayak in place while you enjoy yourself!
How to Use an Anchor Trolley on a Kayak


What Side Do You Put a Kayak on for an Anchor Trolley?

If you’re wondering which side to put a kayak on for an anchor trolley, the answer is that it depends on the type of kayak you have. For example, sit-on-top kayaks should have the trolley installed on the left side so that when you’re paddling, the trolley will be out of your way. On the other hand, if you have a sit-inside kayak, you’ll want to install the trolley on the right side so you can easily access it while paddling.

Ultimately, it’s up to personal preference and what works best for your particular setup.

Is Kayak Anchor Trolley Worth It?

If you enjoy kayaking, then you may be wondering if a kayak anchor trolley is worth the investment. A kayak anchor trolley can be a great addition to your kayaking gear and can make it easier to anchor your kayak in place. Here are some of the benefits of using a kayak anchor trolley:

1. Easier to Anchor Your Kayak: With a kayak anchor trolley, you can easily and quickly anchor your kayak in place. This is especially helpful if you are paddling in windy conditions or in currents. All you need to do is attach the anchor line to the trolley system and then position the anchor where you want it.

2. More Versatile Than Just an Anchor: A kayak anchor trolley can also be used as a tie-down point for other gear such as coolers or fishing gear. This allows you to have more storage space in your kayak since you don’t have to worry about bringing along separate anchors for each item.

3. Can Be Used In Conjunction With Anchor Winch: If you really want to make things easy on yourself, you can use an anchor winch in conjunction with your kayak anchor trolley. An anchor winch will help pull up the heavy anchors that would otherwise be difficult (and dangerous) to pull up by hand.

4. Great For Use In Shallow Water: A lot of times, when people are paddling in shallow water, they’ll run into trouble trying to find something heavy enough to act as an effective anchor. However, with a Kayak Anchor TrolleySystem, you can use any object that’s nearby as long as it’s weighed down – even something as small as a rock!

How Do You Rig an Anchor on a Kayak?

If you’re new to kayaking, rigging your anchor can seem like a daunting task. But fear not! Once you get the hang of it, it’s actually quite simple.

In this blog post, we’ll walk you through everything you need to know about how to rig an anchor on a kayak.

First things first: you’ll need an anchor line and an anchor. The length of your anchor line will depend on the depth of the water you’re paddling in – generally speaking, you’ll want at least 3 feet of line for every 1 foot of water depth.

As for the type of anchor, there are a few different options to choose from. Some kayakers prefer mushroom anchors, while others prefer fluke or grapnel anchors. Ultimately, it’s up to personal preference – just make sure that your chosen anchor is appropriate for the bottom conditions where you’ll be paddling.

Once you have your materials gathered, it’s time to start rigging! First, attach one end of your anchor line to your kayak’s bow eyelet or cleat. Then thread the other end of the line through the center hole of your chosen anchor.

Next, tie a stopper knot at the end of the line (this will keep the anchor from sliding off). Now take a looped turn around the shank of the anchor to create what’s called a bridle. This bridle will help distribute the load evenly between two points on the anchor so that it doesn’t drag sideways when set in place.


Anchoring a Fishing Kayak – A Guide to the Anchor Trolley System

Kayak Anchor Trolley Setup

One of the most important, and often overlooked, aspects of kayak fishing is having a proper anchor trolley setup. A good anchor trolley will allow you to easily and quickly deploy your anchor, keeping your kayak in place so you can fish hands-free. It will also allow you to adjust your position relative to the fish, giving you the best possible chance at a successful catch.

There are a few things to keep in mind when setting up an anchor trolley on your kayak. First, you’ll need to decide where you want to mount it. The front or back of the cockpit is usually the best location, as it provides easy access and won’t interfere with your paddling stroke.

Second, you’ll need to choose the right size and type of line for your needs. A common mistake is using too many lines, which can make it difficult to retrieve your anchor if it gets snagged on something underwater. Third, you’ll need to attach some sort of float to the end of your line – this will help keep your line from getting tangled and will also make it easier to see if you need to retrieve your anchor for any reason.

Once you have all of these items, simply thread the line through the trolley system according to the instructions that came with it. Make sure everything is snug and secure before heading out on the water – an improperly installed trolley can be dangerous! With everything in place, deploying and retrieving your anchor will be quick and easy, allowing you to focus on what’s really important – catching fish!

Kayak Anchor Trolley Diy

If you’re an avid kayaker, then you know the importance of having a good anchor system. After all, you don’t want to be paddling around in circles all day! A kayak anchor trolley is a great way to keep your kayak stationary in the water.

And best of all, it’s relatively easy to DIY. In this blog post, we’ll show you how to make your own kayak anchor trolley. First, gather your materials.

You’ll need some rope, two pulleys, two carabiners, and two snap hooks. You can find all of these items at your local hardware store or online. Next, measure out the rope and cut it to length.

The rope should be long enough to reach from the front of your kayak to the back (plus a few extra feet). Attach one end of the rope to the front deck ring of your kayak using a snap hook. Then run the rope through both pulleys and attach the other end to the rear deck ring using another snap hook.

Finally, clip on both carabiners to the D-rings on either side of your cockpit. That’s it! Your anchor trolley is now ready for use.

To use it, simply clip one carabiner onto your chosen anchoring point (a tree branch or dock piling) and let out as much rope as you need. The pulleys will keep the rope running smoothly through them so you can adjust your position easily without getting tangled up. When you’re ready to move again, just release the carabiner and paddle away!

Anchor Wizard With Anchor Trolley

Anchor Wizard with Anchor Trolley Review If you are in the market for an anchor trolley, the Anchor Wizard with Anchor Trolley is a great option to consider. This product is designed to make it easy to deploy and retrieve your anchor, while also providing a way to keep your anchor line securely in place.

Here is a closer look at the features that this product offers. The first thing that you will notice about this product is that it includes an anchor trolley. This trolley makes it easy to move your anchor line from one side of the boat to the other, which can be helpful when trying to find just the right spot for anchoring.

The trolley also has a built-in cleat, so you can easily secure your line when you are finished using it. Another feature that you will appreciate with this product is the fact that it comes with an adjustable carabiner. This carabiner can be used to attach the Anchor Wizard to either your boat or your dock, making it convenient and easy to use.

Additionally, the carabiner has a quick-release feature, so you can quickly and easily detach it when necessary. Finally, this product also includes a storage bag. This bag helps to keep everything tidy and organized while not in use.

It also has a handy carrying strap, so you can take it with you wherever you go. Overall, the Anchor Wizard with Anchor Trolley is a great choice if you are looking for an easy way to deploy and retrieve your anchor while also keeping your lines securely in place.

Anchor Trolley System

Anchor trolleys are an important part of any boat’s safety gear. They provide a way to secure your anchor line so that it doesn’t get tangled or fouled, and they also allow you to adjust the position of your anchor line easily. There are many different types and styles of anchor trolleys available on the market, but they all serve the same basic purpose.

Most anchor trolleys consist of a pulley system that is installed along the length of your boat’s gunwale (the horizontal beam that runs along the edge of the deck). The pulley system is connected to an eye bolt or similar hardware at each end, which is then used to attach the anchor line. Anchor trolleys typically have two or three sheaves (pulleys) mounted on them, which gives you the ability to adjust the angle of pull on your anchor line.

This is important because it allows you to keep your boat pointing in the right direction while anchored. It also helps reduce stress on your anchor ride (the rope or chain that connects your anchor to the boat), which can prolong its life. Installing an anchor trolley system is relatively simple, and can usually be done with just a few tools.

If you’re not comfortable doing it yourself, there are many marine service companies that offer installation services.


If you are new to kayaking, using an anchor trolley can be a great way to keep your kayak in place. It is easy to set up and use, and it will help you stay safe on the water. Be sure to practice using it before you go out on the water, so that you are familiar with how it works.

Similar Posts