How to Remove Rust from Fishing Lures

To remove rust from fishing lures, start by soaking them in a bowl or bucket filled with white vinegar. Let the lure soak for several hours and then scrub it gently with a soft-bristled brush. Rinse off the vinegar and repeat as needed until all of the rust is gone.

If necessary, use fine steel wool to remove any remaining rust spots. Once you’ve removed all of the rust, dry your lure thoroughly with a clean cloth before storing it away or using it again. Additionally, coat your fishing lures regularly with WD-40 or another lubricant to help prevent future Rust buildup on them!

  • Prepare a solution of water and vinegar: Mix equal parts white vinegar and water in a spray bottle or bowl
  • This acidic solution will help to break down the rust on fishing lures, making it easier to remove
  • Soak Fishing Lure: Place the rusty fishing lure in the mixture and let it soak for several hours, or overnight if necessary
  • The longer you let the lure sit in the vinegar-water mix, the easier it will be to remove all traces of rust when you are finished cleaning
  • Scrub with Brush: Use an old toothbrush or other scrubbing brush dipped into the acidic mixture to gently scrub away any remaining rust on your fishing lures
  • Make sure not to use too much pressure as this could damage delicate areas such as paint finishes or eyes/ hooks that have been attached to your lures over time
  • Rinse & Dry: Once all of the rust has been removed from your lures, rinse them off with clean water then dry them thoroughly using a soft cloth before storing them away for future use
How to Remove Rust from Fishing Lures


How Do You Remove Rust from a Fishing Lure?

Rust on a fishing lure can be removed by using an abrasive material such as steel wool or sandpaper to scrub away the rust. Once the rust has been removed, make sure to rinse off the lure with soapy water and then dry it off completely before applying a protective coating of wax or oil. Be careful not to scratch too deeply into the lure when removing rust, as this could damage its finish.

If you’re uncomfortable using abrasives, there are also chemical solutions available that can help remove rust from lures without damaging them.

What is the Best Way to Get Rust off of Fishing Hooks?

The best way to get the rust off of fishing hooks is by using a combination of white vinegar and baking soda. First, soak the hook in a bowl filled with equal parts white vinegar and water for a few minutes. Then mix together 1 tablespoon of baking soda and 2 tablespoons of water to make a paste.

Once the paste is ready, rub it over any rusty areas on the hook with a soft bristled brush or cloth until the rust has been removed. Finally, rinse off the remaining solution from your fishing hook with clean warm water before drying it off completely for storage or use again!

Can You Fish With Rusty Lures?

Although it’s possible to use a rusty lure, it is not recommended. A rusty lure can actually create a repellent effect and make the fish less likely to bite. The rust on the hook will also decrease its strength and ability to penetrate the fish’s mouth when they strike, resulting in fewer catches.

For best results, you should always use lures that are clean and free of rust or corrosion.

What is the Best Way to Clean Old Fishing Lures?

The best way to clean old fishing lures is to use mild soap, such as dish detergent or hand soap, and warm water. Use a soft-bristled brush or rag to gently scrub away dirt and debris from the lure’s body. Rinse off with fresh water when done and let it air dry.

You may also want to consider using an ultrasonic cleaner if your lures are particularly hard to clean. This will help break up any corrosion on the metal parts of the lure that you cannot reach with a brush.

How To Remove Rust From Fishing Lures, Hooks, Pliers, Tackleboxes, Scissors, Reels, and Metal

Cleaning Fishing Lures With Wd40

Using WD-40 to clean your fishing lures is a great way of removing dirt and grime buildup, especially in hard-to-reach places. It is also an easy method, as all you have to do is spray the product onto the lure and then wipe it off with a soft cloth or rag. This will help keep your fishing lures looking like new for longer.

Additionally, WD-40 can be used as a lubricant on moving parts of some lures that require regular maintenance.

Cleaning Fishing Lures With Coke

Cleaning fishing lures with Coke is an unusual but surprisingly effective method of removing dirt, grime, and algae from the surface of your lure. All you need to do is submerge the lure in a container filled with Coca-Cola for approximately 10 minutes. Once done, use a soft brush or cloth to rub off any remaining residue before rinsing it thoroughly with clean water.

By doing this simple step periodically during your fishing trips, you can keep your lures looking like new!

Cleaning Fishing Lures With Vinegar

Cleaning fishing lures with vinegar can be a great way to keep them in tip-top shape. Vinegar is an excellent cleaning agent as it helps remove dirt, algae, and other debris from the surface of the lure. It also helps prevent corrosion and rust buildup due to its high acidity level.

To clean your lures with vinegar, simply soak the lure in equal parts water and white distilled vinegar for about 15 minutes before rinsing off any remaining residue with fresh water.

How to Clean Rust Out of a Tackle Box

Regular maintenance of your tackle box is important to ensure long life and good condition. To clean rust out of a tackle box, you need to first prepare the area with warm soapy water. Next, use steel wool or sandpaper to remove any loose rust particles from the surface.

After that, apply some sort of chemical solution like white vinegar or lime juice for tougher spots and let it sit for about 30 minutes before rinsing off with warm water. Finally, dry thoroughly with a cloth before storing away your tackle box again!


Removing rust from fishing lures is a simple and easy process that can help prolong the life of your fishing lures. With just a few household items, you can easily remove any rust on your lure and keep it looking like new. If done periodically, this simple cleaning process will ensure that your favorite fishing lures always look their best!

Similar Posts