How to Clean Fishing Reel Bearings

To clean fishing reel bearings, you will need a soft cloth, warm water, and mild dish soap. Begin by disassembling the reel to expose the bearings. Gently wipe each bearing with a clean, dry cloth.

Then dip the cloth in some warm water mixed with mild soap and gently scrub each bearing until all dirt is removed. Rinse off any remaining soap residue from the bearings and let them air dry before re-installing them back into your fishing reel. Once they are completely dry, lightly oil or grease them as needed to ensure the smooth operation of your fishing reel’s parts during use.

  • Step 1: Disassemble the reel
  • First, remove all of the components from the fishing reel, such as the handle and spool
  • Place these aside in a safe place so you can reassemble them later
  • Step 2: Inspect the bearings for any rust or corrosion
  • Use a magnifying glass to look closely at each bearing and inspect it for any damage that may need to be repaired before cleaning
  • Step 3: Soak the bearings in warm water mixed with dish soap for 10-15 minutes to loosen up dirt particles stuck on them
  • After soaking, use an old toothbrush to gently scrub away any dirt still clinging to them
  • Step 4: Rinse off all of your bearings with clean water once they have been scrubbed clean and set aside on paper towels or cloths to dry completely before reassembling your reel parts again
How to Clean Fishing Reel Bearings


How Long to Soak Reel Bearings?

Reel bearings should be soaked for a minimum of 10 minutes, but ideally longer. This allows the lubricant to penetrate the bearing’s internals and fully displace any trapped air or contaminants. The length of time that you soak the reel bearings depends on their condition; if they are particularly dirty or corroded, then a long soak may be necessary in order to ensure that all debris is removed from them.

After soaking, it is important to dry the reel bearings thoroughly before reassembly as any remaining moisture can cause corrosion over time.

Do You Oil Or Grease Fishing Reel Bearings?

When it comes to oiling or greasing fishing reel bearings, the answer depends on various factors. Generally speaking, it is best practice to use oil for most applications because of its superior lubricating properties and its ability to penetrate into tight areas. However, if you are dealing with extreme temperatures (e.g., in a saltwater environment) then using grease can be beneficial as it does not wash away easily as oil can.

Additionally, some reels come pre-lubricated from the factory so you may want to check that before adding anything yourself. Lastly, when selecting an oil or grease for your reel bearings make sure you choose one that is specifically designed for high-speed applications such as those found in fishing reels since regular motor oils may not provide sufficient protection against corrosion and wear caused by friction between moving parts over time.

Is Wd-40 Good for Cleaning Fishing Reels?

WD-40 is a great option for cleaning fishing reels. It helps remove dirt, grime, and rust which can accumulate on the reel over time. WD-40 also lubricates the parts of the reel ensuring it runs smoothly.

Simply spray WD-40 onto a rag or cloth and rub over the affected areas of your fishing reel to clean it. To get an even better result you can combine this with some additional light scrubbing with an old toothbrush or similar object. After that, use a dry rag to wipe off any excess liquid from your fishing reel so as not to attract dirt and dust again in the future.

How Do You Get Old Grease Out of a Fishing Reel?

There are several methods that you can use to get old grease out of a fishing reel. The first step is to remove the spool and handle from the frame of the reel. Once removed, place them in an area where they will be easy to access but also free from any sand or grit which could damage delicate parts.

To begin cleaning, use a small amount of warm soapy water on a soft cloth and gently scrub away any dirt or grime build-up on both sides of the spool as well as between all moving parts. If this doesn’t work then you can try using a degreaser such as WD-40 which should help loosen up any stubborn grease residue.

How To Clean Fishing Reel Tips: How To Oil, Lube & Grease Fishing Reel Bearings

Oiling Fishing Reel Bearings

Oiling your fishing reel bearings is an important part of maintaining and extending the life of your reel. The oil helps to reduce friction, improve performance, and keep corrosion at bay. It’s best to use a lightweight oil designed for fishing reels and apply it after each outing or every few weeks depending on how often you fish.

A small drop inside each bearing should do the trick. Make sure to remove any excess oil with a cloth so that it doesn’t attract dirt or dust which could cause further damage to the reel over time.

Oil Or Grease Fishing Reel Bearings

When it comes to oiling or greasing fishing reel bearings, there are pros and cons to both. Grease is more stable in extreme temperatures and will provide longer-lasting lubrication, however, it can be difficult to remove when servicing the reel. Oil is easier to clean out but may not last as long as grease under certain conditions.

Ultimately, the choice between oil or grease for your fishing reel bearings depends on personal preference and the environmental conditions you’ll be using your reel.

Boca Bearings

Boca Bearings is a leading manufacturer of high-performance bearings and components for all types of applications. Their products are made with the highest quality materials, precision engineering, and innovative technology to ensure maximum performance and reliability in any application. They offer both ceramic hybrid bearings as well as stainless steel options that have been designed to withstand extreme temperatures and harsh environments.

Boca Bearings’ commitment to excellence has earned them numerous awards in the industry, making them one of the best-bearing manufacturers available today.

How to Grease And Oil Fishing Reels

Maintaining and servicing your fishing reel is an essential part of keeping it in optimal condition. Applying grease and oil to the components of your fishing reel will help keep all the parts working properly, while also helping to protect against corrosion. You should start by thoroughly cleaning the reel, then lightly lubricating all moving parts with a lightweight oil before applying a heavier-weight grease where necessary.

Regularly greasing and oiling your fishing reels will ensure they last for many seasons of successful angling!


This blog post has provided a comprehensive guide to cleaning fishing reel bearings. It is important to make sure that the bearings are regularly cleaned and lubricated in order for them to last longer and perform optimally. With this step-by-step guide, it should now be easy for any angler to take proper care of their fishing reels and ensure that they remain in good condition for many years.

Similar Posts